A Toho/KLA-Tencor FLX Series Wafer Stress Measurement System, the Toho FLX-2320-S is an easy to use tool for the measurement of thin film stress utilizing the wafer curvature technique as measured by either a 670 nm or a 780 nm laser. The tool can produce 3D film stress maps as well as monitor time/temperature dependent stress in thin films up to 200 mm thick. |
Contacts
|
Wafer Handling | Round: 3", 4", 5", 6" Square: 100 mm |
---|---|
Film Thickness | Up to 200 mm |
Stress | 1–4000 MPa |
Heating | Up to 500 °C in N2 inert gas |
3D Stress Mapping | 0–180° in 15° increments |
Operating Procedure | |
---|---|
Hazard Assessment | Toho FLX-2320-S HA |
Staff Documents
Drive Folder |