Staff Analysis Only
The Zeiss Xradia Versa 620 XRM is currently available for staff analysis only. Below is step-by-step instructions on how to submit samples for scans and request training for processing data.
Sample dimension
- Smaller sample (i.e., powder vs solid) is better because detector and source can be closer to the sample, which will increase the X-ray counts and reduce measurement time. Max size <5 x 5 x 5 cm for a single scan.
- Sample need to be mounted (i.e., poke, glue, tape, clamp) on one of holders, please leave a note if the sample need to be recovered without any damage/mark.
- Sample cannot change its morphology during the measurement. (i.e., dehydration) This will result a failed reconstruction.
- For samples with high aspect ratio (wide or tall), wide-mode, or vertical-stitch will be applied, that may cause longer measurements.