Staff Analysis Only
The Zeiss Xradia Versa 620 XRM is only available for staff analysis. Below is step by step instructions on how to submit samples for scans and process data.
Sample dimension
- Smaller sample (i.e., powder vs solid) is better because detector and source can be closer to the sample, which will increase the X-ray counts and reduce measurement time. Max size <5 x 5 x 5 cm for a single scan.
- Sample need to be mounted (i.e., poke, glue, tape, clamp) on one of holders, please leave a note if the sample need to be recovered without any damage/mark.
- Sample cannot change its morphology during the measurement. (i.e., dehydration) This will result a failed reconstruction.
- For samples with high aspect ratio (wide or tall), wide-mode, or vertical-stitch will be applied, that may cause longer measurements.