Please note due to Covid-19 restrictions, access to some nanoFAB resources may not be available.
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

ProductAZ 1529 Photoresist
Manufacturer

EMD Performance Materials Corp.

Composition65–70% 1-Methoxy-2-propanol acetate, 5–10% Diazonaphthoquinonesulfonic ester, <0.3% 2-Methoxy-1-propanol acetate25–30% Cresol novolak resin
Synonyms
Typical UsesPositive-tone photoresist for broadband and g/h/i-line exposure
Hazards

2 0 2   Flammable Less serious health effects

Serious eye damage/eye irritation Category 2A

Flammable liquids Category 3

Specific target organ toxicity – single exposure Category 3

StorageWorking volumes in amber bottles, stored in primary litho area; stock bottles in resist fridge.
DisposalLiquid:  solvent waste bottles in wet decks; solid: organics waste pail under Aisle 1 Fumehood
CommentsStandard recipe yields ~3.4 µm resist thickness.
Status

STOCKED  

Check First

Please contact a nanoFAB staff member for uses not listed above.

  • No labels