Page History

Info
This procedure describes the process required to specify or request a specific blade (other than the default glass blade) for the Disco DAD 3240 Dicing Saw. In order to ensure that there is sufficient time to restore the default glass blade, you must complete your session at least 30 minutes before the end of regular business hours (typically 5 pm).

Page properties

id	SOP

Equipment

Disco DAD 3240 Dicing Saw

Process Area

Equipment process area

EquipmentArea	Packaging

Location

W1-060

Step-By-Step Guide

Create a new request in LMACS
1. Enter Dicing Blade Change for the Title.
2. Select the Equipment Configuration Type.
3. Enter Dicing Blade Change as the titleSelect Dicing Saw (Disco DAD 3240) for the Equipment.
4. In the description Summary, enter the desired blade type (e.g., Si blade, sapphire blade).
Add a new Booking within the request, selecting the Dicing Saw (Disco DAD 3240).
1. Add an additional 30 mins to the beginning and end of your processing time to allow for the blade changes.
2. A nanoFAB staff member will change the blade during these additional 30 minute slots.
Once the blade has been changed, a comment will be added to the request.
Login and use the system as usual and you will be billed for the actual used time.

Show If

group	nf-staff

Staff Steps

Note
Two blade changes are required per request: the first to change to the desired blade, the second to restore the default blade once completed. Once the blade has been changed, be sure to post a comment to the request.

Plan to change the blades within the 30 minute windows on either end of the user booking.
Once the blade has been changed, enter a comment into the request.
Enter another comment once the default glass blade has been restored.