Versions Compared

Old Version 14

changes.mady.by.user Timothy Harrison

Saved on

compared with

New Version 15

changes.mady.by.user Aaron Hryciw

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Note
iconfalse
titleOverview

The PDS 2010 is a vacuum system used for the vapour deposition of the parylene polymer onto a variety of substrates. The clear polymer coating provides an extremely effective chemical and moisture barrier with high dielectric and mechanical strength.



Page properties
idequipment-properties


LMACS NameParylene Deposition System
Confluence Labelpds-2010-paralyne-deposition-system
Process Area

Equipment process area
EquipmentAreaDeposition

ModelPDS-2010
VendorSpecialty Coating Systems
Team

Timothy Harrison  Glenn Elaschuk Timothy Harrison Aaron Hryciw




Show If
groupnf-staff


Serial Number140210
UofA Asset Tag Number528475
Service Contract

   

Status
colourRed
titleNO





Show If
groupnf-staff

Contacts


NameCompanyEmailPhone
Sales ContactJoanna SellersSCSjsellars@scscoatings.com(317) 244-1200 x0280



System Features

  • Parylene C and parylene N are provided
  • Maximum substrate size: 20 cm diameter, 26 cm height
  • Two removable jigs are available with 20 cm diameter shelves, although support posts reduce clear area to ~15 cm diameter:
    1) Two shelves with 10 cm and 8.5 cm headroom
    2) Three shelves with 9 cm, 9 cm, and 4.5 cm headroom
Parylene typeCharacteristicsDeposition parameters

Parylene C

  • Typically used for thicker coatings (several µm)
  • Useful combination of electrical and physicals properties for most applications
  • Very low permeability to moisture and corrosive gases
  • Insoluble in any solvent at room temperature
  • Average crevice-penetrating ability
  • ~5 µm/hr (0.0002"/hr)
  • 500 nm/g
  • 125 g max per run
Parylene N
  • Typically used for thinner coatings (nm to a few µm)
  • High dielectric strength
  • Low, frequency invariant dielectric constant
  • Very low dissipation factor
  • Very high crevice-penetrating ability
  • 760 nm/hr (0.00003"/hr)
  • 100 nm/g
  • 125 g max per run


Documents

Operating Procedure

Parylene Deposition System SOP

Hazard Assessment
Datasheet

Google Drive Live Link
urlhttps://drive.google.com/file/d/1BP0DpgCjvA3wH3JHadE7lU6Q5sOmuadS/view?usp=sharing


Show If
groupnf-staff

Staff Documents

Operator Manual

Google Drive Live Link
urlhttps://drive.google.com/file/d/0B800HgP1RkZLb0tOckhZVXdwOWM/view?usp=drivesdk


Embedded Google Drive Folder
sortname
urlhttps://drive.google.com/drive/folders/1u_yh03rZ4Vff0Dvf_FHMnhOt8yAnBLKt


Related Documents

Content by Label
cqllabel in ("parylene","parylene-c","parylene-n")