Please note due to Covid-19 restrictions, access to some nanoFAB resources may not be available.

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Additional measures may need to be put in place as the situation evolves—we appreciate your patience as we navigate this unprecedented scenario.

CampusReady pass

The University of Alberta's COVID-19 Vaccination Directive is in force as of .  To support the directive, the CampusReady pass has been implemented for all staff, students, and visitors. As the nanoFAB is an on-campus service provider, all nanoFAB users are required to have a valid CampusReady pass before doing any on-site work.  

Facility-wide policies

Warning

Masks are required in all common areas of ECERF, including the nanoFAB.   The nanoFAB only provides masks for working in the cleanroom and 10k areas.

If you are feeling unwell, do not enter the nanoFAB:  stay at home until you are well. 

  • Social distancing protocols are in effect:  as far as possible, maintain a distance of ≥2 m between people, and avoid all physical contact.
  • Wash your hands with soap and water often, or use an alcohol-based hand sanitizer; in either case, disinfect for at least 20 s.
  • Hand sanitizer stations are available outside every lab:  please disinfect your hands prior to entering.
  • Regular disinfecting of high touch common areas and equipment
  • Avoid touching your face with unwashed hands.
  • Use a tissue when you cough or sneeze and throw it in a garbage bin lined with a plastic bag.
  • If you don’t have a tissue, sneeze or cough into your sleeve.
  • Wash your hands immediately after coughing and/or sneezing.

Staffing Schedule

Info

Effective   - the nanoFAB will operate with a split shift model for staffing. Staff members whose job function can be fulfilled from home, will primarily work from home. Remaining staff members who are required on-site to fulfill their primary job functions will work on-site daily, in two non-overlapping shifts. Please note that emails may be delayed as staff will not be responding to email while on-site. 

  • Shift 1 - 08:00 - 13:00 (morning)
  • Shift 2 - 13:00 - 18:00 (afternoon)

On-Site Staff

...

Morning Shift

08:00 - 13:00

User Profile
usermerobins

...

User Profile
usernzhang

User Profile
usershihongx

User Profile
userhy1

...

User Profile
userahryciw

User Profile
usersbozic

...

User Profile
userhume

User Profile
userdjfortie

...

Afternoon Shift

13:00 - 18:00

...

User Profile
usereflaim

...

User Profile
usershiauyin

User Profile
userpli4

...

User Profile
userdeolivei

User Profile
usersmunro

User Profile
usertr1

...

User Profile
userglenne

User Profile
userkaracic

Maximum occupancy limits

To facilitate social distancing while working in nanoFAB lab spaces, the following maximum occupancy limits are in effect:

...

  • New gowning procedure
    • Sanitize hands immediately prior to entering the gowning area.  A hand sanitizer dispenser is located opposite the gowning door, next to the white board.
    • When entering the gowning room, users should immediately don the following, in this order:
      1. Gloves:  do not double-glove unless absolutely necessary, as cleanroom gloves are in short supply.
      2. Face mask:  remove the mask you are wearing and don a fresh mask
      3. Bouffant cap
    • When leaving the cleanroom, remove all cleanroom garments except for gloves, use gloved hands to open the cleanroom door, and discard gloves in garbage bin outside the cleanroom.
  • Be extra diligent about cleaning items with IPA when entering the gowning areas.  This includes:
    • Personal items (e.g., phones, pens, notebooks, specimen holders)
    • Communal items such as safety goggles
  • Change gloves immediately if you touch your face, cough, or sneeze.
  • If you cough at a work station, wipe down the table surface with IPA, but to prevent damage to equipment, do not wipe down tool PCs or equipment with IPA or any other disinfectant.

...